전체 메뉴
The Next
Machining Centers - M4-5AX
M4-5AX
Table Ø800mm / High Precision/Rigidity 5-Axis Vertical Machining Center for ‘Difficult-To-Cut’ Parts
M4-5AX reduces setting time, cost, and errors of complex-shaped parts that require multiple processes by enabling the entire machining process in one-setting of the material.
Rigid and accurate machining is ensured with a high performance in-house designed spindle. Cooling of the spindle and frames minimizes thermal deformation to ensure high precision during long-time machining.
Hwacheon software installed on the machine improves productivity and precision, provides better machining quality compared to existing 5-axis machining centers.
Machine Specification
| Item | M4-5AX | ||
|---|---|---|---|
| 8K [High Torque] |
12K | ||
| Travel | |||
| X-axis Stroke | mm | 950 | 950 |
| Y-axis Stroke | mm | 1,000 | 1,000 |
| Z-axis Stroke | mm | 650 | 650 |
| A-axis Tilting Angle | deg | ±120 | ±120 |
| C-axis Rotation Angle | deg | 360 | 360 |
| Distance from Table Surface to Spindle Gauge Plane |
mm | 180 ~ 830 | 180 ~ 830 |
| Distance from X-axis guide Top Surface to the center of the spindle |
mm | 497 | 497 |
| Table | |||
| Working Surface | mm | Ø800 x 630 | Ø800 x 630 |
| Table Loading Capacity | kg | 1,200 | 1,200 |
| Table Surface Configuration (T slots W x P – No. of slots) |
mm | 18 x 100 / 5ea | 18 x 100 / 5ea |
| Spindle | |||
| Max Spindle Speed | rpm | 8,000 | 12,000 |
| Spindle Motor | kW | 55 / 30 | 30 / 25 |
| Type of Spindle Taper Hole | - | BBT-50 | BBT-50 |
| Spindle Bearing Inner Diameter | mm | Ø100 (Opt.: Ø120) |
Ø100 |
| Type of Spindle | - | Built-in Motor | Built-in Motor |
| Method of Spindle Lubrication | - | Oil-jet | Oil-jet |
| Method of Spindle Cooling | - | Jacket Cooling (Oil Cooler) |
Jacket Cooling (Oil Cooler) |
| Feedrate | |||
| Rapid Traverse (X / Y / Z) |
m/min | 36 / 36 / 30 | 36 / 36 / 30 |
| Rapid Traverse (A / C) |
rpm | 20 / 30 | 20 / 30 |
| Motor | |||
| Servo Motor (X / Y / Z) |
kW | 7 / 4 / 9 | 7 / 4 / 9 |
| Servo Motor (A / C) |
kW | 4 / 7 | 4 / 7 [HEIDENHAIN : 5.4 / 8.6] |
| Coolant Motor (Spindle / Chip Flushing) |
kW | ||
| Spindle Cooler (50/60Hz) | kW | 0.75 | 0.75 |
| Table 냉각 Motor | kW | 0.4 | 0.4 |
| ATC | |||
| Type of Tool Shank | - | BBT-50 (Opt.: CAT-50, HSK-A100, SK-50) |
BBT-50 (Opt.: CAT-50, HSK-A100, SK-50) |
| Type of Pull Stud | - | 90˚ Type | 90˚ Type |
| Tool Storage Capacity | ea | 30 (Opt.: 60) |
30 (Opt.: 60) |
| Max. Tool Diameter (with / without Adjacent Tools) |
mm | Ø120 (Opt.: Ø230) |
Ø120 (Opt.: Ø230) |
| Max. Tool Length | mm | 400 | 400 |
| Max. Tool Weight | Kg | 20 | 20 |
| Method of Tool Selection | - | Fixed Address | Fixed Address |
| Power Sources | |||
| Electric Power Supply | kVA | 125 | 125 |
| Compressed Air Supply (Pressure x Consumption) |
- | 0.5~0.7MPa | 0.5~0.7MPa |
| Tank Capacity | |||
| Spindle Coolant / Table Coolant | ℓ | 80 / 60 | 80 / 60 |
| Lubrication | ℓ | 20 | 20 |
| Coolant | ℓ | 550 | 550 |
| Machine Size | |||
| Height | mm | 4,252 | 4,252 |
| Floor Space (L x W) |
mm | 5,126 x 6,336 [60T : 5,126 x 6570] |
5,126 x 6,336 [60T : 5,126 x 6570] |
| Weight | Kg | 28,000 [60T : 28,500] |
28,000 [60T : 28,500] |
| NC Controller | - | Fanuc 31i-B5 | Fanuc 31i-B5 |
-
As an innovation leader in the industry with more than 7,000 employees
-
On the following pages you can obtain information about the nume
HWACHEON
2014 ⓒ HWACHEONCOPYRIGHT 2014 HWACHEON TECHNOLOGY ALL RIGHTS RESERVED